CONOMATIC

 

TABLE OF CONTENTS
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
A
Adjusting Bolts, Screws, Rods, Studs (Threaded Parts)
Arms and Levers
Attachment Drive Gears 1 5/8 8 VN, 2 5/8 6 SEC
Attachment Drive Spindle 2 1/4 6 SD & 2 5/8 6 SE
Attachment Drive Spindle 3 1/2 6 SF & 4 6 SZ
Auxiliary Bushings
Auxiliary Sleeves
Auxiliary Spindle Attachment 2 5/8 8 & 3 8
Auxiliary Spindle Attachment Parts 1 5/8 6 TAA
Auxiliary Spindle Attachment Parts 1 5/8 8 VNA
Auxiliary Spindle Attachment Parts 2 1/4 6 & 2 5/8 6
Auxiliary Spindle Attachment Parts 3 1/2 6 & 4 6
Auxiliary Spindle Heads
Auxiliary Spindles (and Tapping Spindles)
Auxiliary Yokes
To Top
B
Bearing Cases
Bearing Spacers
Bevel Gears
Blocks, Shear Pin
Blocks, Toolholder (Assemblies & Components)
Bolts, Adjusting
Bolts, Collet Operating Fork
Bushings, Auxiliary
Bushings, Drive
Bushings, Miscellaneous
C
Carrier Index Mechanism, Spindle 5 & 5 1/2 4 KE
Carrier Index Mechanism Components 1 5/8 8 VNA
Carrier Indexing
Carrier Indexing Arm Assembly 2 1/4 8 GB, 2 5/8 8 GA & GB, 3 8 GI
Center Drive Lugs
Chuck Operating Lugs
Chucking Shoes  
Clutch Gears 9/16 QF
Clutch Gears, Tapping Attachment 2 1/4 & 2 5/8 8
Clutch Gears
Clutch Gears Miscellaneous  
Clutch Yokes & Assemblies
Collet Operating Fork Bolts
Collet Operating Fork Studs
Collet Operating Fork Wear Plates
Collet Operating Forks
Collet Operating Spools (External& Internal)
Collet Tube Adjusting Nuts and Assemblies 
Collet Tubes
Cross Slide Inner Spacers
Cross Slide Outer Spacers
Cut-Off Tool Holders
D
Die Yokes
Dovetail Toolholders - 8 Degrees
Dovetail Toolholders - 8 Degrees and 12 Degrees
Drill Holders (End Toolslide)
Drilling Attachment, High Speed 2 5/8 8
Drive Bushings
Drive Spindles, Attachment 2 1/4 6 SD & 2 5/8 6 SE
Drive Spindles, Attachment 3 1/2 6 SF & 4 6 SZ
Drive Sprockets Split 1 1/4 8 VV, 1 1/2 8 WW, 1 5/8 8 VB
To Top
E
End Toolslide Drill Holders
External Collet Operating Spools
External Finger Holder Assemblies & Components
F
Feed Change Gears 9/16 6 QE & QF
Feed Change Gears 2 1/4 through 4 1/4 6 & 8 Model C
Feed Change Gears (Various Machines) Page 1 & Page 2
Feed Lugs (Plates)
Feed Plates (Lugs) 
Finger Assemblies   & Page 2
Finger Hinge Pins  
Finger Lock Ring
Finger Holder Assemblies and Components (External) 
Finger Holder Assemblies and Components (Internal) 
Finger Thrust Rings
Fingers
Fork Bolts, Collet Operating
Fork Studs, Collet Operating
Fork Wear Plates, Collet Operating
Forks, Collet Operating 
Frames, Roll Support & Components
G
Gear Racks, Hand Chucking
Gears, Attachment Drive 1 5/8 8 VN, 2 5/8 6 SEC
Gears, Bevel
Gears, Clutch (Miscellaneous Gears)
Gears, Clutch 9/16 QF
Gears, Clutch Tapping Attachment 2 1/4 & 2 5/8 8
Gears, Clutch Miscellaneous
Gears, Compound
Gears, Feed Change (Various Machines)Pg 1, Pg 2, Pg 3, Pg 4, Pg 5
Gears, High Speed Drilling Attachment & Threading Attachment 1 1/2 6
Gears, High Speed Drilling on Main Drive Shaft 1 6 SL, TS
Gears, Miscellaneous
Gears, Ring (Worm Wheels)
Gears, Spindle Drive  
Gears, Spindle Driven
Gears, Spindle Speed Change 9/16 QE & QF
Gears, Spindle Speed Change 1 6 TV, 1 1/4 6 TVB
Gears, Spindle Speed Change 1 VKA, 1 5/8 VNA & TAA
Gears, Spindle Speed Change 2 5/8 6 SEC
Gears, Spindle Speed Change 1 5/8 6 TF
Gears, Spindle Speed Change 2 1/4 through 4 1/4 6 & 8 Model C (Spur Tooth)
Gears, Spindle Speed Change 2 1/4 through 4 1/4 6 & 8 Model C (Helical Tooth)
Gears, Spindle Speed Change (Various Machines) Pg 1, Pg 2, Pg 3
Gears, Spindle Speed Change (Vertical Machines)
Gears, Tapping Attachment 1 1/2 6 
Gears, Tapping Driven Tap-In 1 6 TV, 1 1/4 6 TVB
Gears, Tapping Driven Tap-Out 1 6 TV, 1 1/4 6 TVB
To Top
H
Hand Chucking Gear Racks & Pinion Shafts
High Speed Drilling Attachment 2 5/8 8
High Speed Drilling Attachment & Threading Attachement Gears 1 1/2 6
High Speed Drilling Gears on Main Drive Shaft 1 6 SL, TS
Hinge Pins, Finger
Holders, Cut-off Tool
I
Idler Shafts and Shaft Assemblies
Index Gear Assembly Components 2 1/4 8 GLC, 2 5/8 8 GKC, 3 1/4 8 GSC
Index Mechanism, Spindle Carrier 5 & 5 1/2 4 KE
Indexing Arm Assembly ,Carrier 2 1/4 8GB, 2 5/8 8 GA & GB, 3 8 GI
Internal Collet Operating Spools
Internal Finger Holder Assemblies & Components
K
Knee Turners, Miscellaneous
Knee Turners, Reversible 
L
Levers and Arms
Lock Ring
Lugs, Center Drive
Lugs, Chuck Operating
Lugs, Feed (Plates)
M
Miscellaneous Clutch Gears & Pg 2
Miscellaneous Replacement Parts
N
Nose Cover Assemblies & Components
Nuts, Miscellaneous 
Nuts, T-Slot 
To Top
P
Pinion Shafts
Pins &Pins/ Studs
Planetary Gear and Index Assembly (Spindle Carrier Index Mechanism) 5 & 5 1/2 4 KE
Pusher Tube Spool Bushings & Retaining Rings
Pusher Tubes
R
Retaining Rings, Pusher Tube
Reversible Knee Turners
Ring Gears (Worm Wheels)
Rods, Miscellaneous (Threaded Parts)
Roll Block Assemblies & Components
Roll Support Assemblies & Components
Roll Support Frames & Components
Rolls  Pg 1, Pg 2, Pg 3
To Top
S
Screws, Miscellaneous (Threaded Parts)
Screws. Wedge Adjusting
Shafts, Idler (& Assemblies)
Shafts, Miscellaneous
Shafts, Pinion
Shear Pin Blocks
Shoes, Chucking
Sleeves, Auxiliary
Sleeves, Miscellaneous
Spacers, Bearing
Spacers, Cross Slide Inner
Spacers, Cross Slide Outer
Spacers, Toolholder
Spindle Attachment, Auxiliary 2 5/8 8 & 3 8
Spindle Attachment Parts, Auxiliary 1 5/8 6 TAA
Spindle Attachment Parts, Auxiliary 1 5/8 8 VNA
Spindle Attachment Parts, Auxiliary 2 1/4 6 & 2 5/8 6
Spindle Attachment Parts, Auxiliary 3 1/2 6 & 4 6
Spindle Carrier Index Mechanism Components 1 5/8 8 VNA
Spindle Carrier Index Mechanism (Planetary Gear & Index Assembly) 5 & 5 1/2 4 KE
Spindle Drive Gears
Spindle Driven Gears
Spindle Heads, Auxiliary
Spindle Speed Change Gears 9/16 QE & QF
Spindle Speed Change Gears 1 6 TV, 1 1/4 6 TVB
Spindle Speed Change Gears 1 VKA, 1 5/8 VNA & TAA
Spindle Speed Change Gears 2 5/8 6 SEC
Spindle Speed Change Gears 1 5/8 6 TF
Spindle Speed Change Gears 2 1/4 through 4 1/4 6 & 8 Model C (Spur Tooth)
Spindle Speed Change Gears 2 1/4 through 4 1/4 6 & 8 Model C (Helical Tooth)
Spindle Speed Change Gears (Various Machines) Pg 1, Pg 2, Pg 3
Spindle Speed Change Gears (Vertical Machines)
Spindles, Work
Split Drive Sprockets 1 1/4 8 VV, 1 1/2 8 WW, 1 5/8 8 VB
Spool Bushings, Pusher Tube
Spring Compensator Assemblies
Springs
Sprockets
Sprockets, Split Drive 1 1/4 8 VV, 1 1/2 8 WW, 1 5/8 8 VB
Stock Stop Mechanism Components 1 1/4 8 VV, 1 1/2 8 WW, 1 5/8 8 VB
Stock Stop Mechanism Components 2 5/8 8 GB, 3 8 GI
Stock Stop Mechanism Components, Miscellaneous
Studs Pg 1, Pg 2
Studs, Collet Operating Fork
Studs, Miscellaneous (Threaded Parts)
To Top
T
Tapping Attachment Clutch Gears 2 1/4 & 2 5/8 8
Tapping Attachment Gears 1 1/2 6 
Tapping Driven Gears Tap-In 1 6 TV, 1 1/4 6 TVB
Tapping Driven Gears Tap-Out 1 6 TV, 1 1/4 6 TVB
Tapping Spindles (and Auxiliary Spindles)
Threaded Parts: Adjusting Bolts, Screws, Rods, Studs
Threading Attachment & High Speed Drilling Attachment Gears 1 1/2 6
Threading Gears Drive 1 5/8 8 VNA
Threading Gears Driven 1 5/8 8 VNA
Thrust Rings, Finger
Thrust Rings, Miscellaneous
Thrust Washers
Tool Adjusting Wedges
Tool Bit Holders Universal Type
Tool Holders, Cut-Off
Toolholder Assemblies, Blocks & Components
Toolholder Spacers
Toolholders, Dovetail 8 Degrees
Toolholders, Dovetail 8 Degrees and 12 Degrees
T-Slot Nuts
U
Universal Type Tool Bit Holders
To Top
W
Washers, Thrust
Wear Plates, Collet Operating Fork
Wedge Adjusting Screws
Wedges, Tool Adjusting 
Work Spindles
Worms 
Worm Wheels  (Ring Gears)
Y
Yokes, Auxiliary
Yokes, Clutch (& Assemblies)
Yokes, Die
To Top
 

CONOMATIC


Automatic Tooling Corporation

521 St. Jean
Detroit, MI 48214 USA


Tel: 313-822-9250
Fax: 313-822-0192
E-mail us: atc-sales@automatic-tooling.com