CONOMATIC

BEARING SPACERS, BUSHINGS, SLEEVES, THRUST WASHERS

Parts listed below may fit additional machine sizes and models not listed
*Listed in numerical order excluding prefix.
.

A.T.C.
PART NO.
REPLACES
PART NO.*
DESCRIPTION
8601  ST-489 Bushing for End Toolslide Holder 2 5/8 and Larger Machines
5487    E-555 Spacer Bearing for Quill Assembly 1 1/4 8 VV, 1 5/8 8 VB, 1 7/8 8 XX
8448 GK-1123 Bushing
8604 GK-1127 Thrust Ring - Bronze
8529 GK-1156 Bronze Ring
8524   G-1163 Thrust Bushing (Cast Iron)
8902   G-1226 Stock Stop Bushing in Right End Column 1 6 SW, 1 5/8 6 TA, 2 1/4 6 SD, 2 5/8 6 SE,
                   3 1/2 6 SF, 4 6 SZ, 1 1/4 8 VV, 1 5/8 8 VB, 1 7/8 8 XX, 2 1/4 8, 2 5/8 8, 3 8
8498
     8498 SPECIAL
  G-1236 Bushing in Bracket 1 1/4 8 VV, 1 5/8 8 VB & VN, 1 7/8 8 XX (1.625 I.D.)
     Bushing In Bracket (Same as 8498 except 1.555 I.D.)
8591   G-1251 Auxiliary Spindle Lock Bushing (1 1/2 6-Spline)
8623 NC-1363 Washer 
7977   G-1456 Sprocket Bushing
6875 QE-1824
QE-2872
Support Bushing 9/16 6 QE
7125 VN-2245 Fork Pivot Bushing 1 5/8 8 VNA
8679   G-2329 Ball Lock Clutch Sleeve 1 1/4 8 VV, 1 1/2 8 WW, 1 5/8 8 VB
7193 GK-2750 Bushing 2 5/8 8 GKC
6875 QE-2872
QE-1824
Support Bushing 9/16 6 QE
9307 GK-2971 Spacer (Set of 2 Equal Halves)
8919   G-3131 Thrust Washer - Hardened
5831   G-3480 Bushing for Quill 2 5/8  8, 3 8
9120   G-3837 Spacer
8363   G-3848 Thrust Washer
5509   G-4116 Thrust Ring - Bronze
8467   G-4166 Bronze Bushing
8777   G-4184 Clutch Sleeve Bushing
9445   G-4186 Thrust Ring on Power Feed Cross Shaft 5 4 KE, 3 1/2 6 SF, 4 6 SZ, 1 1/4 8 VV, 
8241   G-4193 Ball Lock Clutch Sleeve
8468   G-4196 Split Bushing (Set of 2 Equal Halves)
5488 VN-4664 Column Bushing 1 1/2 8, 1 5/8 8
7893   G-8277 Bronze Bushing
8672 VN-8778 Bronze Bushing
8624 VN-10428 Sleeve
8866   G-11272 Thrust Washer - Hardened    
8959   G-12521 Bushing for Lifter
9365   G-13484 Washer for Idler Sprocket - Bronze
8671 SA-15314 Seal Sleeve
8715   G-16737 Spacer
7115   G-16834 Thrust  Ring on Drum Shaft 6 & 8 Small Machines through 1 5/8 8 VNA, 5 5/8 VQA
8299   G-18012 Bushing
9578       20096 Thrust Ring (1 7/8 x 4 x 1/2) 2 5/8 8 GK
8716       20239 Spacer
9604   G-20599 Thrust Bushing for Worm Wheel G-20596 (A.T.C. 9603)
8296
     8297
      25747 Bronze Bushing 2 1/2 x 1 1/2 x 7/8
     Bronze Bushing 2 1/2 x 1 1/2 x 1/4
9426   G-32806 Bushing
8676   G-32847 Sleeve 2 5/8 8 GB
8231   G-32851 Spacer
8445   G-34234 Thrust Ring    
8342   G-34271 Pusher Bushing - Bronze
8440       37393 Bronze Bushing
8379 CX-38773 Sleeve
5364       45488 Bearing Spacer   
5359       45489 Attachment Drive Spindle Thrust Washer 3 1/2 6, 4 6
 
A.T.C.
PART NO.
REPLACES
PART NO.*
DESCRIPTION
5413       45766 Attachment Drive Spindle Spacer 3 1/2 6
5338       60598 Attachment Drive Spindle Thrust Washer 2 1/4 6, 2 5/8 6
5328       65371 Yoke Spacing Collar 2 1/4 6, 2 5/8 6
8522       75117 Sleeve
8295 CX-85257 Bushing
8876       90449 Thrust Ring on Power Feed Cross Shaft 2 1/4 6 SD, 2 5/8 6 SE
8323       91909 Tapping Air Trip Thrust Plate 1 5/8 8 VN
8491       95518 Clutch Inner Spacer on Power Feed Cross Shaft 1 8 VKA, 1 1/4 8 VLA,
                                                                        1 1/2 8  VMA, 1 5/8 8 VNA
8492       95519 Spider Inter Bearing Spacer on Power Feed Cross Shaft 1 8 VKA,
                                                    1 1/4 8 VLA, 1 1/2 8 VMA, 1 5/8 8 VNA
8494       95525 Worm Wheel Retainer on Power Feed Cross Shaft 1 8 VKA, 1 1/4 8 VLA,
                                                                           1 1/2 8 VMA, 1 5/8 8 VNA
8493       95526 Bearing Spacer on Power Feed Cross Shaft 1 8 VKA, 1 1/4 8 VLA,
                                                                          1 1/2 8 VMA, 1 5/8 8 VNA
8584       96309 Bushing 1 8 VKA
8681 CX-96748 Bushing for Drill Holder
To Top
 

CONOMATIC


Automatic Tooling Corporation

521 St. Jean
Detroit, MI 48214 USA


Tel: 313-822-9250
Fax: 313-822-0192
E-mail us: atc-sales@automatic-tooling.com